$18.99 - $24.99
- Made to fit crank spindles and press-fit Mid BB frames. - Simple and easy to install. - Includes an assortment of spacers to optimize chainline and crank clearance. - Odyssey 6061-T6 aluminum dust spacer included.
- 4140 Chromoly - 3 Possible peg positions for longer peg life - 14mm with 3/8-inch adapters included - 4 inches (length) x 1-3/8 inches (outer diameter) - Sold in pairs - 8.75 oz (17.5 oz for a pair)
WeThePeople's Tripod Seatpost is made from strong, lightweight 6061 aluminum. The Tripod design is stronger and has more structural support than Pivotal seat/post combos. It uses a 3-point mounting system, where two rear supports press into channels underneath a Tripod seat, and a single bolt up front secures the system.
Check out the dinosaur skin-like texture of WeThePeople's Raptor grips! Like a raptor, you can wrap your claws around these grips and let the good times roll. The soft, VEX rubber compounds conforms perfectly to your hand, and holds up great to long days on the bike. • 150mm Long, 27.8mm Diameter • 30 durometer rubber • Low flange design • Includes WeThePeople nylon barends
- Straight gauge spokes with a proprietary grade of stainless steel that is as good or better than the materials used by the world’s most renowned spoke makers. - Sized and dimensioned specifically for BMX.
Odyssey racing spokes use butting dimensions that are tailor-made for BMX racing, and they’re still strong enough to handle some light street riding too. You’ll save roughly an ounce per wheel on 36’s. Only the best stainless steel has been used, and the gradual butting transitions are ideal for the stresses that a 20-inch wheel has to endure. - Proprietary professional-grade stainless steel. - BMX specific butting transition dimensions.
$149.99 - $168.99
WeThePeople's Patron fork is all about choices. The 7mm full-investment casted heat-treated hollow dropouts are what make this fork so special and are offered in either a traditional 35mm offset or a more street orientated 25mm version for all the front-wheel jedis out there. This is the go to choice for most of the WTP pro team, so you know it's got to be good. • Material: Full-liquid post heat-treatment on 4130 “M2“ chromoly • Steerer Length: 170mm • Offset: 25mm or 35mm • Dropout: 7mm, full investment cast, heat-treated 4130 chromoly, 3/8'' axle • Fully CNC’d steerer, single butted integrated crown race designed to work with integrated headsets with a 45° bearing
The Kink fork cap bolt aims to make things just a little more convenient and is keyed for both a 6mm allen key and 3/8" ratchet drive. The cap itself is CNC machined from high-grade 7075-T6 aluminum to provide the strongest threads possible. The M24×P1.5 thread size is standard across all Kink forks, and on a majority of other forks, as well. TECH SPECS - Thread Type: M24×P1.5 - Tool Type: 3/8" Ratchet and 6mm allen hex - Material: 7075-T6 Aluminum - Weight: 0.8oz
Our updated removable brake mount kit includes everything you need to attach brakes to your Kink frame. This through-bolt style brake mount design fits late 2016 and newer Kink frames, as well as several other popular brand BMX frames. The kit includes brake mounts, brake mount bolts, cable stop, and barrel adjuster. TECH SPECS - Includes: Brake Mounts, Bolts, Cable Stop, and Barrel Adjuster - Features extended bolt-in mounts, fits 2016 and later Kink frames, and fits with most popular BMX brands. - Weight: 1.5oz
The Slim by Four is a BMX-specific brake pad with a symmetrical shape designed for both forwards and backwards braking. A custom inner frame helps to stiffen the pad and prevents excessive braking power from being lost to flex. SPECS - Clear and Gum colored “Soft” compound pads provide extra grip on powder coated rims. - Black “Normal” compound Slim-By-Four pads are the most popular pad choice for most riders.
Made of Stolen's proprietary Thermalite material, the sleeve resists cracking and deformation while sliding better than chromoly on most surfaces. These sleeves come stock on the Stolen Silencer & Fiction Troop pegs and will also fit over our chromoly Barrel Peg (with axle washer). - Length: 4.4-inch - Diameter: 1.6-inch - Material: Plastic (Thermalite) - Weight: 0.8- ounce each - Replacement sleeve only - Sold individually
Broc Raiford can bunnyhop over a house so it’s only right that he has his own grips to hold on to. Broc’s signature grip comes in at 160mm in length and features rope detailing on the ends to tie in with Broc’s nautical theme.
One of the most important goals that Odyssey had when they sat down to work on new braking designs was to make the whole system easier to install (and remove) without sacrificing performance. They also wanted to be sure that every component would be very affordable too. The Ghost Pad addresses the hassles of brake pad installation by eliminating the traditional dome shaped washers used for toe-in. The pad improves stiffness by building the toe-in into the pad shape and utilizing a solid extruded aluminum frame at its core. The Ghost Pad’s assembly consists of simply lining it up with the rim and tightening down an M6 female bolt. Comes stock on the Springfield brake. SPECS Hardware: - In-bound bolt, 5mm Hex Key, M6x1.0 Thread - Pad Material: Black (standard) or Clear Rubber (Soft) - Weight: 1.0oz / 28g (pair)
The Graduate sleeve is the replacement sleeve for the Graduate peg that's made from long lasting, fast sliding plastic. - Sold singly
For the Bluebird chain, Odyssey took the proven and reliable KMC 510-HX chain and added a permanently attached, factory installed half-link to one end. When the chain is trimmed to size you can easily decide whether or not to use the half-link. Original factory assembled pin joints are radically stronger than workshop assembled ones, so this is a huge benefit.
- Upper cables for Odyssey's Gyro G3 (sold separately) - Universal fit. - Upper cables only.
$35.99 - $57.99
WeThePeople's Socket Pivotal seat post is made from 6061 aluminum for a perfect blend of strength and weight savings. It works with all Pivotal seats and comes in the perfect color and size to match your bike. Plus, there's a 17mm socket head built into the bottom of the post for park-side adjustments to your wheels.
One of the most important goals that Odyssey had when they sat down to work on new braking designs was to make the whole system easier to install (and remove) without sacrificing performance. They also wanted to be sure that every component would be very affordable. The Springfield brake drops the two ordinary (and confusing) brake springs and replaces them with one central spring that applies the same force to each arm, requiring no additional adjustment. This makes assembly incredibly easy–just bolt it on and go. The brake arms are designed to maximize stiffness and save weight without adding excessive cost. By die-casting the arms and using shared tooling to make each side, the Springfield meets all of the original design goals, resulting in a very powerful and affordable brake.
Protect your bars and prevent your grips from getting shredded with WeThePeople's Supreme Bar Ends. CNC machined from 6061 aluminum, these tough, bolt-in end caps protect your investment from tons of abuse when you have to jump ship on an imperfect execution of a trick. Simply slide them into the ends of your handlebars and tighten them up. Then, go nuts!
Sunday's Seeley PC Peg is Jake Seeley's signature peg. This 4.5-inch peg features a full Aluminum Alloy core with a proprietary plastic blend sleeve for silky smooth grinds on all surfaces. - Fits 14mm axle, 3/8-inch with included adapter - Plastic replacement sleeves sold separately - Pegs Sold individually
This is Tom Dugan’s all new signature sprocket. In addition to its classic look, the Fang increases in thickness towards the center of the sprocket for increased strength. - 7075 Aluminum - Sweet machining
Designed exclusively for use with the Kink Boulevard front hub, the Boulevard guard is injection molded from a durable nylon material. These guards slide directly over the existing hub hardware, so no additional parts or disassembly are required. This guard can be used on one or both sides of the Boulevard hub, providing protection where you need it.
Replacement Driver/Clutch for East-Coaster Hub
WeThePeople's Feelin tire has a slick-tread design with a durable, grippy rubber compound, making it an awesome choice for the street and park.
New dust cap design, with Monogram laser etched logo, for a cleaner look to accommodate a taller riding set up with less spacers. Same quality as Odyssey's Pro Headset using high-quality sealed bearings and a precision tapered wedge to keep the headset tight at all times. FEATURES - High-quality sealed bearings. - Color matched spacers included. - 15mm dust cap. With 3mm, and 2mm spacers - Laser etched Odyssey bearings. SPECS - Campagnolo standard spec. - 1 1/8-inch integrated headset. - 45º tapered bearings - 41.8mm outer diameter (fits 42mm BMX head tubes).
$29.99 - $44.99
Sunday’s Freeze Topload Stem uses a die-cast aluminum body with forged 6061-T6 aluminum face plate rocking an embossed Sunday logo. It has recessed sides and bottom section to reduce weight without losing an ounce of strength. With their careful material and design choices, Sunday is able to offer the same stem used by the Sunday team at a very affordable price. - Reach: 52mm - Stack Height: 33mm - Rise: 34mm (1mm drop when inverted) - Clamp Bolts: M6 x 1.25mm pitch (x4) - Pinch Bolts: M6 x 1.25mm pitch (x2) - Weight: 10.5 oz
$9.99 - $22.99
- Press fit designed to work the hub's non-drive side collar.
- New ultra-slim 2014-T6 aluminum seat clamp with replaceable hardware and self-aligning nut. - 6061-T6 aluminum construction. - Standard 1-1/8-inch size.
It’s a traditional straight up pivotal design with a 200mm length.
The product designers at Sunday worked closely with Jake to nail down a grip that is perfect for him. Jake's grip comes in at 160mm and features a gradually increasing rib width. This grip can be run either way, depending on which side you prefer. The grip also features a tapered core for comfort.
Page 1 of 3 Next page