Zipp makes the impossible possible with their 303 Firecrest Carbon Disc Brake wheels—they're equally at home on the flats as they are in the mountains. The 45mm-deep rims slice through the wind more efficiently than even many deep-section wheels thanks to their 28.5mm-wide dimpled rims. And, by creating a seamless junction between rim and tire, the increased width further reduces drag. The 303s climb with the best and re-accelerate out of corners like rockets since they barely register on the scale, which makes them a must-have on undulating terrain. The extra wide rim also allows running wider tires at lower pressures with less fear of pinch flatting, which boosts ride quality and comfort and reduces rolling resistance. Plus, Zipp's 77D/177D disc hubs gives you incredible stopping power in wet and dry conditions alike, and they're thru-axle compatible (sold separately) for jaw-dropping steering precision and power transfer. You also get Sapim's oustanding CX-Ray spokes.
• Strong Custom Strider Rim • Durable No-Flat Tire • Tread pattern and bearings matches the ST-4, and will fit on any ST-Model
Wherever the trail leads, SRAM's Roam 40 wheel is ready to go. The 25mm wide rims give big tires the support they deserve for outstanding cornering control, and the rims are durable enough for day-after-day sessions, yet light enough for race day. Stomp on the pedals and feel the excellent 4 pawl DoubleTime hub with 52 points of engagement. Ditch the tubes with the full UST compatibility to reap the rewards of excellent traction, control, and fewer flats. And, the Roams' great features continue with the Solo Spoke design that uses one spoke length to fit the entire wheel. This rear wheel comes with a quick release and 12mm thru-axle end caps that can be interchanged without tools.
Built for all-day trail rides and enduro racing, and developed with the World Championship-winning Atherton DH Team, Stan's Bravo wheelset rethinks carbon fiber from the ground up. The Bravo's Radial Impact Absorbing Carbon Technology (RiACT) is three times stiffer than Stan's aluminum rims laterally, but absorbs radial impacts to withstand bigger hits and roll faster. Patented Bead Socket tubeless technology improves traction, and creates a lighter, stronger rim. Weighing less than 1608g (26"), the Bravo's 32mm WideRight profile increases tire volume without negatively affecting tread shape or sidewall height. With the added durability and quick engagement of Stan's Neo Ultimate hubs, the Bravo is the new benchmark for trail wheelsets. Bravo wheels include pre-installed tape for tubeless use and presta valve; 12x142mm rear wheels also include quick-release end caps and quick release; small parts bag, replacement spokes, and spoke tension readout for your unique wheelset. - Tubeless ready with rim tape and valves installed - Designed for trail, all-mountain and enduro racing - Faster engaging, 100% CNC-machined Neo Hubs - Sapim Race 2.0/1.8/2.0 spokes with Secure Lock aluminum nipples - RiACT system absorbs impacts and rolls faster - Bead Socket Technology for unmatched tubeless performance - WideRight rim design optimized for wider trail and all-mountain tires
$399.99 - $439.99
The disc brake road revolution has arrived. The EA90 SL Disc combines the stout 19.5-millimeter internal tubeless EA90 SL rim with Easton’s M1 6-bolt disc hubs that have received an A+ Future-Proof rating by Velonews. Hubs easily converts from out of the box 9x100 and 10x135 quick release to 15x100 & 12x100; parts sold separately. These wheels are light, fast and bombproof. Best of all, they rely on standard Sapim double-butted straight-pull spokes and straight-pull spokes and standard external alloy nipples, so they’re easy to maintain and service.
- Full carbon fiber construction - 32mm Internal width - Tubeless ready rim (tape and valves installed) - 45mm Offset improves spoke tension balance and wheel stiffness - High gloss black logos and interchangeable vinyl decals - Single spoke length for entire wheel - Hub and bearing system designed and validated for longevity, smoothness, low drag, and zero play - 6 double tooth pawls (3 engage at a time) - 120 points of engagement (3 degrees) - One length spoke used throughout wheelset (F&R)
Lighter and stronger than aluminum rims, the Valor’s carbon lay-up is engineered to absorb radial vibrations and impacts through a construction that is both elastic and strong. Stan's NoTubes has constructed a lightweight carbon fiber rim design not just to be stronger than aluminum, but also to perform better in real world riding conditions. Valor wheels include: pre-installed tape for tubeless use and presta valve; 12x142mm rear wheels also include quick-release end caps and quick release; small parts bag, replacement spokes, and spoke tension readout for your unique wheelset. - Designed for cross country racing and riding - Faster engaging, 100% CNC machined Neo Ultimate hubs - Sapim Custom Laser 1.8/1.5/1.8 spokes with Secure Lock aluminum nipples - RiACT system absorbs impacts and rolls faster - Bead Socket Technology for unmatched tubeless performance - WideRight rim design optimized for wider tires / 2.00 - 2.25 - 2-year warranty with 3-year crash replacement
$1,330.00 - $1,843.00
If going flat out fast is what you want, then this wheelset has all the details covered. DT's top triathletes choose the ARC 1100 DICUT 80 when it's race day. It's developed in partnership with aerodynamics specialists SWISS SIDE and equipped with SINC ceramic bearings to get up to speed and stay there. Supporting the complete system of the rider and bike with minimal drag and unparalleled handling under all conditions, riding fast is guaranteed. Finally the precision wheel build with high and even spoke tension gives you the reliability to dominate all of the 180 km.
- Origin8 Bolt 23mm inner width AL6061-T6 alloy tubeless ready disc brake clincher with sleeved joint, eyeletted spoke holes, and post-anodized sanded gloss black finish - Origin8 Elite convertible MTB disc hubs with anti-bite Shimano cassette body featuring 6 pawl/54 point/6.6º engagement - 32 hole 15TA front/32 hole 12TA rear 6 bolt MTB disc hubs laced with J-bend DT Swiss Competition spokes - Weight: 838g front/932g rear - ISO-Mountain certified and assembled in the USA - Width ID (mm): 23 - Axle: Thru 15mm - Thru 12mm - Rim Color: Blk - Rim Model: OR8 Bolt Alloy MTB XC - Hub Model: OR8 MT-1110 Elite MTB - O.L.D.: 100mm/142mm - Hub Color: Blk - Gears: 8-11s Cass - Brake Type: 6B - Spoke Type: DT-2.0/1.8 BK - Spoke Count: 32H - Wall: Dbl - Valve: PV Type: Tubeless Compatible
- Origin8 Bolt 21mm inner width T700 UD carbon asymmetrical tubeless ready disc brake clincher - Origin8 Elite convertible cross/gravel disc hubs with anti-bite Shimano cassette body featuring 6 pawl/54 point/6.6-degree engagement - 28 hole 15TA front/28 hole 12TA rear 6 bolt cross/gravel disc hubs laced with straight pull Sapim CX-Ray spokes - Weight: 765g front/793g rear - ISO-Mountain certified and assembled in the USA - Width ID (mm): 21 - Axle: Thru 15mm - Thru 12mm - Rim Color: Blk - Rim Model: OR8 Bolt Carbon Asym Gravel - Hub Model: OR8 CX/GX-1110 Elite Cross/Gravel - O.L.D.: 100mm/142mm - Hub Color: Blk - Gears: 8-11s Cass - Brake Type: 6B - Spoke Type: Sapim CX-Ray BK - Spoke Count: 28H - Wall: Dbl - Valve: PV - Type: Tubeless Compatible
- Position Front - Wheel Diameter/ISO 700C / 622 - Axle Type QR - Hub Spacing 100mm - Wheel-Brake Comp. Rim - Freehub Body - - Wheel Tire Type Clincher - Rim Material Aluminum - Rim Construction Double wall - Rim Internal Width 13.9mm - Rim inner width range 0-21.9mm - Rim Color Silver - Rim Drilling 32 - Hub Model Shimano Claris HB-2400 - Wheel Weight - - Spoke Type Stainless - Valve Presta - Rim External Width 19.6mm - Depth 22mm - Rim Model Alex DA22 - Skewers Included Yes
The Crest sets the benchmark for XC tubeless performance. Years of refinement and victories in some of the most prestigious races in the world have created a rim that's lighter and stronger by design. Stan's patented lower-profile Bead Socket Technology offers an easy and reliable tubeless seal for decreased rolling resistance, less weight, and superior traction. One ride makes it clear why the best racers around the world choose the Crest (even when they're sponsored by someone else). Faster, lighter, easier, and more reliable, the Crest rim with Neo hubs is the ultimate XC tubeless wheelset. What’s Included: Crest wheels include pre-installed tape for tubeless use and presta valve; 15x100mm front wheels include quick-release end caps and quick release. - For cross country riding and racing - Industry standard durable, lightweight rims - Bead Socket Technology (BST) for superior tubeless performance - Wider rim cavity increases tire volume for faster rolling, better traction, and improved cornering - Stronger and lighter low-profile sidewalls for quicker acceleration - Compatible with standard tires when used with or without tubes
The Crest sets the benchmark for XC tubeless performance. Years of refinement and victories in some of the most prestigious races in the world have created a rim that's lighter and stronger by design. Stan's patented lower-profile Bead Socket Technology offers an easy and reliable tubeless seal for decreased rolling resistance, less weight, and superior traction. One ride makes it clear why the best racers around the world choose the Crest (even when they're sponsored by someone else). The Crest wheelset now includes the much stronger and faster-engaging Neo hub system. The Neo's larger bearings and a stronger, stiffer, shoulderless axle offer unmatched strength and durability. Featuring four precision pawls simultaneously engaging a 36-tooth ratchet ring for super-fast 10-degree engagement, the Neo also offers a 100% CNC machined hub shell and tool-free disassembly. New SealLock end caps stay put and make wheel installation a breeze. And with a huge range of options, including Boost, there's a Neo hub to fit just about any bike. Faster, lighter, easier, and more reliable, the Crest rim with Neo hubs is the ultimate XC tubeless wheelset. What’s Included: Crest wheels include pre-installed tape for tubeless use and presta valve; 12x142mm rear wheels also include quick-release end caps and quick release. - For cross country riding and racing - Industry standard durable, lightweight rims - Bead Socket Technology (BST) for superior tubeless performance - Wider rim cavity increases tire volume for faster rolling, better traction, and improved cornering - Stronger and lighter low-profile sidewalls for quicker acceleration - Compatible with standard tires when used with or without tubes
- Position Rear - Wheel Diameter/ISO 700C / 622 - Axle Type QR - Hub Spacing 135mm - Wheel-Brake Comp. Rim - Freehub Body Freewheel - Wheel Tire Type Clincher - Rim Material Aluminum - Rim Construction Single wall - Rim Internal Width 19.7mm - Rim inner width range 0-21.9mm - Rim Color Silver - Rim Drilling 36 - Hub Model Formula FM-31-QR - Wheel Weight - - Spoke Type Steel - Valve Schrader - Rim External Width 25mm - Depth 16mm - Rim Model Alex X101 - Skewers Included Yes
- Position Rear - Wheel Diameter/ISO 700C / 622 - Axle Type QR - Hub Spacing 135mm - Wheel-Brake Comp. Rim and Disc IS 6-bolt - Freehub Body Shimano HG - Wheel Tire Type Clincher - Rim Material Aluminum - Rim Construction Double wall - Rim Internal Width 17mm - Rim inner width range 0-21.9mm - Rim Drilling 36 - Hub Model Shimano FH-M475 - Wheel Weight - - Spoke Type DT Stainless - Valve Presta - Rim External Width 22.8mm - Depth 30mm - Rim Model Alex G6000 - Skewers Included Yes
- Position Rear - Wheel Diameter/ISO 26'' / 559 - Axle Type QR - Hub Spacing 135mm - Wheel-Brake Comp. Rim - Freehub Body Freewheel - Wheel Tire Type Clincher - Rim Material Aluminum - Rim Construction Single wall - Rim Internal Width 19.8mm - Rim inner width range 0-21.9mm - Rim Color Silver - Rim Drilling 36 - Hub Model Formula FM-31-QR - Wheel Weight - - Spoke Type Steel - Valve Schrader - Rim External Width - - Depth 16.8mm - Rim Model Evo E-Tour 20 - Skewers Included Yes
Inspire confidence in your ride with the ZTR Arch EX. Proven in the Enduro World Series, but light enough to be a favorite among XC racers everywhere, the Arch EX is Stan's most versatile rim design. The patented low-profile Bead Socket Technology design offers superior tubeless compatibility for less rolling resistance, more control, and better traction. Lightweight performance is important, but the Arch EX was designed to let you maintain control on even the most technical of trails. For maximum durability, an internal arch reinforces the rim, adding strength and stiffness. Combined with a thicker spoke bed, the Arch EX is an ideal choice for more aggressive and heavier XC and trail riders. The Arch EX wheelset now includes the stronger, faster-engaging Neo hub system. The Neo's 100% CNC machined shell, larger bearings, and stronger, stiffer, shoulderless axle offer unmatched strength and reliability. Featuring four precision-engineered pawls and a 36-tooth ratchet ring, the Neo offers fast 10-degree engagement. With new SealLock endcaps, tool-free disassembly, and a huge range of options, the Arch EX wheelset with Neo hubs is here to make any bike faster and more reliable. - For trail and all mountain use - Stan's most versatile rim design - Bead Socket Technology (BST) for superior tubeless performance - Lightweight rim profile with reinforced internal arch - 24.6mm rim width increases tire volume for more control and less rolling resistance - Compatible with standard tires when used with or without tubes
Stan's delivers an aluminum wheel that rivals the weight of carbon: the ZTR Crest. The Crest rim is strong while keeping the weight low, resulting in a stiff, XC race-ready rim. Plus, this sweet hoop is built with Stan's 3.30 hubs and DT Swiss spokes for snappy responsiveness and reliability. The Crest also uses Stan's BST technology for easy tubeless conversions, while its wide inner rim profile and lowered sidewalls boost tire volume for enhanced traction.
Offering decreased rolling resistance on paved roads, unbeatable comfort on gravel, and a weight barely over 1500g, the Avion Carbon Disc is the future of performance road wheelsets. The Avion's R Series Bead Socket Technology is designed for tubeless-specific road tires, traditional clincher tires when used with tubes, and wider gravel and cyclocross tires. The 28mm WideRight rim profile of the Avion increases tire volume and decreases pressure for less rolling resistance, superior traction, and more comfort. Featuring our vibration damping Radial Impact Absorbing Carbon Technology (RiACT) and built around the reliability and quick engagement of our new Neo and Neo Ultimate hubs, the Avion offers performance that doesn't stop when the pavement ends. Avion wheels come with yellow tape and 55mm tubeless valves installed. Rear wheels ship with 12x142mm TA end caps installed, and include QR end caps and skewers. Inside the included small parts bag you'll find replacement spokes and a final QC readout for your unique wheelset. - Designed for Disc Brake Road, Gravel, and Cyclocross - New faster engaging, 100% CNC machined Neo Ultimate hubs - Sapim CX-Ray spokes with Secure Lock aluminum nipples - 41mm deep aerodynamic RiACT rims absorb impacts and roll faster - BST-R series for tubeless road, traditional road with tube, and wider tires - 28mm WideRight rim design optimized for 25mm-40mm tires - 2-year warranty with 3-year crash replacement
The Vuelta Corsa SuperLite 700c 11sp Wheelset is lightweight, reliable, and proven on the road. From the bike path, to your favorite century, or even to leading the Peloton, Vuelta road wheels will get you to the finish in style. Get yours today! - Handbuilt - Compatibility: Shimano/SRAM 9/10/11 speed - Rims: Vuelta 27mm profile welded 6066 alloy with CNC sides-Valve: Presta - Spokes: Vuelta aero triple-butted stainless steel with alloy nipples- - Lacing: Front radial / Rear 2 cross (F20H x R24H) - Hubs: Vuelta road with Japanese EZO cartridge bearings (F2 x R5) - Extras: Vuelta alloy quick release skewers and nylon rim strips, 8/9/10 speed adaptor - Weight: Front 623g/Rear 872g = Pair 1495g
The Vuelta MTB Race 27.5 Wheelset is lightweight, reliable, and proven on the mountain and trail. Look good, feel confident, and go fast! Vuelta MTB Wheels are just the upgrade you are looking for. - Handbuilt - Compatibility: Shimano/SRAM 8/9/10 - Rims: Vuelta tubeless ready 23mm wide welded 6066 alloy disc only with stainless - Spokes: Vuelta round double butted stainless steel with alloy nipples - Lacing: Front 2 cross / Rear 3 cross (F24H x R28H) - Hubs: Vuelta 2&1 front and rear 6-bolt disc with Japanese EZO cartridge bearings - Axles: Front and rear quick release or thru axle kit with adaptors included - Extras: Vuelta alloy quick release skewers, axle adaptors. rear thru axle and nylon rim strips - Weight: Front 713g/Rear 905g = Pair 1618
The name Crossmax is synonymous with XC riding and racing. This new tubeless-ready wheel boasts many of the same features and technologies as premium XC race wheels, but at a more attainable price. One of the key factors is Mavic's UST technology, which allows for easy setup of tubeless ready tires and gives you all the associated benefits including better traction and control, a smoother ride quality and a reduced risk of punctures. The new rim design features a 22mm internal width with a hookless profile. The wheels are built with 24 straight-pull spokes to save weight and maximize wheel strength, so you get just the right balance of efficiency and durability. Power transfer is handled by Mavic's TS-2 freehub, which is compatible with all common axle standards. It’s available in Boost or Non-Boost hub widths and can be used with quick-release or thru-axle setups with optional adapters.
Affordable World Cup performance without compromise. For over a decade SPANK Industries has made it their mission to make World Cup quality affordable to everyone. SPIKE Race 28 rims are hand laced, trued and tensioned with SPANK’s new SPIKE 32H J-hook hubs, offering increased engagement and adaptability, lighter weight, and exceptional stiffness, in a tough yet trim racy profile. The SPIKE Race 28 wheelset packs the unrivaled strength and durability of Dynamal alloy construction, the stiffness of SPANK’s trademark OohBah rim design, and the ultimate tubeless performance of SPANK’s revolutionary Bead Bite anti-burp tubeless rim hooks. Pound for pound, the SPIKE Race 28 wheelset is one of the best values on the market for riders seeking true competition level performance on their All Mountain, FR, or DH MTB. Key Technologies: - Bead Bite - OohBah - Dynamal Alloy Size (in.): 26" / 27.5" Weight - F/R (g): - R/H 135mm: ±2030 (26") / ±2100 (27.5) - R/H 150mm: ±2060 (26") / ±2150 (27.5) Configuration: 32H - 3 cross lacing Front hub (mm): 6 bolt disk mount, 20x110 Rear hub (mm): 6 bolt disk mount, 12x135 / 12x150 Freehub: Steel - Shimano (XD available) Adapters Included (mm): 15x100 incl. (12x135 only) Adapters Available (mm): - FRONT: QR / 15x100 / 20x110 - REAR: QRx135 / 10x135 / 12x135 / 12x142 / 12x150 / 12x157 Spokes: J-hook, triple butted 2.2/1.7/2.0, brass nipples Tubeless: Tubeless ready Discipline: Race / Freeride
The Cosmic Elite is a perfect entry point into high-level race performance. This all-new UST Road Tubeless system delivers a smoother ride with and improved puncture resistance while retaining a lightweight feel for climbing and accelerating. By removing the tube, we’ve also removed friction—so there’s less rolling resistance, which means it requires less energy to reach higher speeds. The UST system, including the sealant that makes them more resistant to punctures, is also 40g lighter than a traditional tube and tire system. It also delivers a proven aero advantage: Wind tunnel testing led us to create a 30mm deep rim that optimizes aero performance and improves stability in crosswinds. The alloy rim benefits from Mavic's unrivaled experience creating light yet strong rim extrusions. Mavic does this by carefully tuning the thickness of the rim wall to hit the sweet spot between stiffness, strength and weight. Pedaling torque is efficiently transferred with Mavic's FTS-L freewheel system, which is light, smooth, stiff and easy to service. The hub easily converts from Shimano/SRAM to Campagnolo cassette. The Cosmic Elite comes with Mavic's Yksion Pro UST tires, which deliver a very low rolling resistance to further enhance the efficiency of these wheels.
The XC/Trail orientated Aeffect SL wheelset comes with 24mm internal rim width to balance weight with optimal tire profile when combined with cross country and trail tires. In addition to a great rim, the Aeffect SL incorporates a new Race Face Trace hub design with full cartridge bearings for extended life and durability. The hub also boasts a competitive 9.2-deg of engagement using a durable 3-pawl design. These hubs are tough, think a clydesdale with a motor kind of tough. Aeffect wheels can handle almost anything you can throw at them.
The XC/Trail orientated Aeffect SL wheelset comes with 24mm internal rim width to balance weight with optimal tire profile when combined with cross country and trail tires. In addition to a great rim, the Aeffect SL incorporates a new Race Face Trace hub design with full cartridge bearings for extended life and durability. These hubs are tough, think a clydesdale with a motor kind of tough. Aeffect wheels can handle almost anything you can throw at them.
What It Is The definitive mountain wheel. The M6 Series defines the modern and varied interpretation of the mountain bike. Loaded with traction and acceleration on the climb, it's also backed with precision and control while absorbing vibrations and impacts on the descent. The M6 Series is designed in two diameters and three widths to ensure your sophisticated preference for tire size and pressure is met with an uncompromising tire-to-rim interface. Who It's For The mountain biker who wonders what is possible, the skeptic afraid of "plastic" wheels, the weight weenie, the Clydesdale, the high-mileage guy, the weekend warrior. It would be easier to describe who it is not for… Why We Made It ENVE showed the world that a mountain bike wheel could be carbon — we're still immensely proud of that achievement. A mountain bike wheel, however, can be so much more. The M6 Series is not about technical challenges, and we refuse to chase specifications in order to be the widest, tallest, or stiffest. For the M6 Series of wheels, the question was not about carbon, rather, "What is the potential of a mountain bike wheel?" Each M6 Series wheel model is designed for the broad range of tire widths, hub configurations, and sizes so that you, the modern trail rider, can choose between them.
Spank's DH-dialed, competition-ready Spike Race 28 wheelset is light and tough, perfect for the demands of modern riders and World Cup courses. Dynamal rims use Spank's OohBah design for acceleration-enhancing stiffness and low weight. The 28mm-wide rims provide a wide, stable tire footprint that grips the corners like nothing else. BeadNip tech is tubeless ready and locks tire beads into the rim, making tubeless installation a breeze. Smooth-rolling Spank hubs feature six-bolt rotor compatibility, CNC-machined freehub body, and the rear hubs are available in your choice of 135mm or 150mm spacing.
Finally, a true high-end MTB upgrade wheelset for groms! The SPOON 28 wheelset is a first of its kind wheel upgrade made specifically to service the 20-inch and 24-inch MTB market. Like its big brother the SPANK SPOON 32, the SPOON 28 wheelset is constructed with durable six series alloy and features SPANK’s patented OohBah rim profile, meaning the SPOON 28 is not only strong and stiff, but also safe and reliable. A 23mm internal width accepts a wide range of 24-inch tires, from street to DH. Equipped with hybrid SPIKE Hubs with alloy freehub and internals to minimize weight, the SPOON 28 wheelset adapts easily to most major MTB standards. - Key technologies: OohBah - 20-inch Weight - F/R (g): ±1550 - 24-inch Weight - F/R (g): ±1930 - Configuration: 32H 3 cross lacing - 20-inch Rims: SPANK SPOON 28-20 Rim - 24-inch Rims: SPANK SPOON 28-24 Rim - Front Hub (mm): 6 bolt disc mount - 15x100 - Rear Hub (mm): 6 bolt disc mount - 12x142 - Freehub: Alloy Shimano (XD available) - Adaptors Included (mm): QRx135 - Adaptors Available (mm): FRONT: QR / 15x100 / 20x110 REAR: QRx135 / 10x135 / 12x135 / 12x142 - Spokes: J-hook, brass nipples - Tubeless: Not Recommended - Colors: black / red / blue - Technologies: OohBah, Bead Nip, MGR - Discipline: Kids
Designed with input from Stan's Enduro World Series teams, the new Arch MK3 is ready to own every trail. WideRight optimized for maximum stability with 2.25" to 2.5" tires, Stan's expanded the internal width out to 26mm while keeping the rim incredibly light. The 27.5" Arch MK3 weighs only 425g. A new proprietary alloy and stronger, low-profile rim shape means the new Arch MK3 is built to last. Featuring Bead Socket Technology, the new Arch MK3 also offers the unmatched traction, control, and reliability only found on genuine Stan’s NoTubes rims. - The perfect balance of strength and weight - 24% wider than the Arch EX for improved stability with larger tires - Same light weight as the Arch EX - Low-profile shape rolls faster, lasts longer, and helps stop tire pinch flats - 25% stiffer and stronger for improved handling - Lighter and more durable rim shape and alloy - Neo hubs accelerate quicker and last longer - Most trusted tubeless system for easy setup and low maintenance - Sapim Secure Lock aluminum nipples - WideRight optimized for Trail tires / 2.25 - 2.50 - Includes pre-installed tape for tubeless use and presta valve; 12x142mm rear wheels also include quick-release end caps and quick release.
Page 1 of 16 Next page